Magnus Production Pallets are designed with selected hardwood veneer and high polymerized resol type thermosetting plastic  resin. The product is high density with thermoset added black plastic overlay of 270 GSM making it high abrasion resistant.

Suitable for: AAC block, concrete blocks, chemical treatment blocks, soil bricks, concrete bricks, pavers, tiles, ceramic tiles and for automobile sectors.

Product formats

Thicknesses: 25, 30, 35, 40, 50, 62.5, 75 mm

Length: 305, 610, 920, 1220, 1525 mm

Width: 305, 610, 920, 1220, 1525 mm

Density: 0.95 to 1.15 gm/cm3




prodcution pallets


Pin It


TECHNICAL SPECIFICATIONS
  Dimension BIS Requirement Observation Values
1. Length
1525 + 3
- 0
1526mm
2. Width
1525 + 3
- 0
1526mm
3. Thickness 26mm 25.50mm
4. Squareness 2 mm/1000 mm 0.95mm
5. Edge straightness 2 mm/1000 mm 0.50mm
6.

Workmanship & Finish

Clause 7 Satisfactory
  Physical properties
7. Density 0.95 gm/cm2 1.1 gm/cm2
8. Moisture content 5-15% 7.25%
9. Bond quality test
Boiling-drying@ 60 ±2°
4 hours - 20 hours
three Cycles
a) No visible delamination in glue line and polywood face
b) No forcible seperation and fibre should be adhered between plies
Satisfactory
Satisfactory
10. Breaking strength
250 x 50 x thickness (mm)
Along - 550kgf
Across - 400kgf
740kgf
515kgf
11. Static bending strength

Along the grain M.O.E.

Across the grain M.O.E.

Along the grain M.O.R.

Across the grain M.O.R.
Avg. - 7500 N/mm2
Ind. - 6700 N/mm2
Avg. - 4000 N/mm2
Ind. - 3600 N/mm2
Avg. - 50
Ind. - 45
Avg. - 30
Ind. - 27
8650 N/mm2
7530 N/mm2
5835 N/mm2
4220 N/mm2
72 N/mm2
58.29 N/mm2
45.20 N/mm2
37.95 N/mm2
12. Tensile strength Along - 55 Mpa
Across - 50 Mpa
68.90 Mpa
58.22 Mpa